Agilent Technologies 35670A Manual page 305

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

DISPlay[:WINDow[1|2|3|4]]:WATerfall:TOP

Specifies the top Z-axis value in a waterfall display.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S|RPM|COUNT|AVG]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies the starting Z-axis value which appears at the top of a waterfall display. Use the

DISP[:WIND]:WAT:BOTTom command to specify the corresponding Z-axis value which appears at the

bottom of the waterfall display.

Use the DISP[:WIND]:WAT:COUNt command to specify a range of Z-axis values. The

DISP:WAT:COUNt command determines the number of traces displayed in a waterfall. If a range of

values is specified, the analyzer holds the DISP:WAT:BOTTom value constant and adjusts the top value.

WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to

specify C, and WIND4 to specify D. If you do not send the optional trace-box specifier, the command

defaults to trace box A.

DISPlay[:WINDow[1|2|3|4]]:WATerfall:TOP {<num-

ber>[<unit>]}|<step>|<bound>

OUTPUT 711;":Disp:Waterfall:Top 2.70387e+37"

OUTPUT 711;"DISPLAY:WIND3:WAT:TOP 9.26034e+37"

DISPlay[:WINDow[1|2|3|4]]:WATerfall:TOP?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific

command/query