Agilent Technologies 35670A Manual page 275

DISPlay[:WINDow[1|2|3|4]]:POLar:CLOCkwise
Specifies the direction of the vector in a polar diagram.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
If DISP:POLar:CLOCkwise is OFF, the vector travels in a counter-clockwise direction.
If DISP:POLar:CLOCkwise is ON, the vector travels in a clockwise direction.
The setting of this command affects the DISP:POLar:ROTational command.
WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to
specify C, and WIND4 to specify D. If you do not send the optional trace box specifier, the command
defaults to trace box A.
DISPlay[:WINDow[1|2|3|4]]:POLar:CLOCkwise OFF|0|ON|1
OUTPUT 711;":DISP:POL:CLOCKWISE OFF"
OUTPUT 711;"disp:window2:pol:cloc ON"
DISPlay[:WINDow[1|2|3|4]]:POLar:CLOCkwise?
Integer
Option: not applicable
Synchronization Required:
Preset State: OFF (+0)
SCPI Compliance:
no
instrument-specific
DISPlay
command/query
8-21