Agilent Technologies 35670A Manual page 152

CALCulate
CALCulate[1|2|3|4]:LIMit:UPPer:CLEar[:IMMediate]
Deletes the upper limit line from the specified display.
Command Syntax:
Example Statements:
Attribute Summary:
Description:
To delete an upper limit line, send CALC:LIM:UPP:CLE. To delete a lower limit line, send
CALC:LIM:LOW:CLE.
You can delete part of a limit line if it consists of segments. See the CALC:LIM:UPP:SEGM:CLE
command for information about deleting a segment of the upper limit line.
6-44
CALCulate[1|2|3|4]:LIMit:UPPer:CLEar[:IMMediate]
OUTPUT 711;"Calc3:Limit:Upp:Clear:Imm"
OUTPUT 711;"CALC:LIMIT:UPP:CLEAR"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
command