Calculate[1|2|3|4]:Waterfall:slice:select:pointcommand/Query - Agilent Technologies 35670A Manual

CALCulate
CALCulate[1|2|3|4]:LIMit:LOWer:REPort:YDATa?
Returns the Y-axis value of the failed points for the lower limit test.
Query Syntax:
Example Statements:
Return Format:
When data is ASCII-encoded, (FORMat ASCii) <DEF_BLOCK> takes the following form:
<DEF_BLOCK> ::= [<Y-axis value>,<Y-axis value> . . .]
When data is binary-encoded, (FORMat REAL) <DEF_BLOCK> takes the following form:
<DEF_BLOCK> ::= #<byte><length_bytes>[<Y-axis value>,<Y-axis value> . . .]
<byte> ::= one ASCII-encoded byte specifying the
<length_bytes> ::= ASCII-encoded bytes specifying
The following definitions apply to both ASCII- and binary-encoded data.
<Y-axis value> ::= a real number
Attribute Summary:
Description:
This query returns the Y-axis value for data points which fail the lower limit test.
Data is not returned if limit testing is turned off (CALC:LIM:STAT OFF) or if all trace points are above
the specified lower limit.
6-38
CALCulate[1|2|3|4]:LIMit:LOWer:REPort:YDATa?
OUTPUT 711;"CALC4:LIMIT:LOW:REPORT:YDAT?"
OUTPUT 711;"calc3:limit:low:report:ydat?"
<DEF_BLOCK>
length bytes to follow
data bytes to follow
(Y-axis value
limits: - 9.9e+37 : 9.9e+37
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
the number of
of the failed point)
no
instrument-specific
query
number of