Agilent Technologies 35670A Manual page 215

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:SYNThesis[:IMMediate]

Creates a frequency response curve from the synthesis table.

Command Syntax:

Example Statements:

Attribute Summary:

Description:

This command creates a frequency response curve based on the current synthesis table.

Values for the table are entered with the CALC:SYNT:DATA command. The results of the synthesis

operation are stored in the synthesis data register specified by the CALC:SYNT:DEST command.

This command is not trace specific. It ignores the trace specifier.

CALCulate[1|2|3|4]:SYNThesis[:IMMediate]

OUTPUT 711;"calc2:synthesis:imm"

OUTPUT 711;"Calc:Synthesis"

1D3 Curve Fit/Synthesis

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific