Agilent Technologies 35670A Manual page 240

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:WATerfall:SLICe:SELect

Selects the waterfall slice at the specified X-axis position.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies the X-axis position where the waterfall slice is to be made. The slice can be

copied to a data register with the CALC:WAT:SLIC:COPY command.

To specify a waterfall trace in trace box A, send CALC1; in trace box B, send CALC2; in trace box C,

send CALC3; and in trace box D, send CALC4. The trace specifier defaults to trace box A if the specifier

is not used.

CALCulate[1|2|3|4]:WATerfall:SLICe:SELect {<number>

[<unit>]}|<step>|<bound>

OUTPUT 711;":CALC4:WAT:SLICE:SEL 880661"

OUTPUT 711;"calculate:wat:slic:select 757455"

CALCulate[1|2|3|4]:WATerfall:SLICe:SELect?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific

command/query