Agilent Technologies 35670A Manual page 269

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

DISPlay:STATe

Turns on (or turns off) the analyzer's display.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

To turn off the analyzer's display, send DISP:STAT OFF. All power to the display is disabled. The

analyzer's screen is blanked out.

To turn on the display or to turn "display blanking" off, send DISP:STAT ON.

Press any front-panel key to turn on a blanked screen.

DISPlay:STATe OFF|0|ON|1

OUTPUT 711;":disp:state OFF"

OUTPUT 711;"Disp:State OFF"

DISPlay:STATe?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

command/query