Agilent Technologies 35670A Manual page 406

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

MMEMory:STORe:PROGram

Saves an Instrument BASIC program to a file on the specified disk.

Command Syntax:

<FILENAME> ::= '[<PATH>]<filename>'

<PATH> ::= <MSIS>[{DOS_DIR}]

<MSIS> ::= RAM:|NVRAM:|INT:|

<DOS_DIR> ::= \<DIR_NAME>\

<DIR_NAME> ::= ASCII characters

<filename> ::= ASCII characters (see beginning of chapter

Example Statements:

Attribute Summary:

Description:

This command saves the currently active Instrument Basic program to the specified disk. The program

must be located in the active program buffer (see the PROG:NAME command). If the active program

buffer does not contain a program the analyzer generates an error, "Program Error, No program exists."

If the file name matches the name of another file on the disk, the this command overwrites the old file.

MMEMory:STORe:PROGram <FILENAME>

EXT[,<select_code>[,<unit _number>]]:

for <filename> restrictions)

OUTPUT 711;"Mmemory:Stor:Prog 'IBPROG'"

OUTPUT 711;"MMEM"STORE:PROG 'INT:MYPROG'"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific