Agilent Technologies 35670A Manual page 286

DISPlay
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:RIGHt
Specifies the last X-axis value on the display.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command specifies the value of the last (most right) X-axis point on the display.
The trace specifier, WINDow [1|2|3|4], determines which trace you are selecting. Omit the specifier or
send WIND1 for trace A, WIND2 for B, WIND3 for C, or WIND4 for D.
To determine the X-axis unit, send DISP:TRAC:X:RIGH? UNIT.
8-32
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:RIGHt {<number>
[<unit>]}|<bound>
limits: -9.9e37:9.9e37
OUTPUT 711;"Disp:Wind:Trace:X:Scale:Righ -9.29266e+37"
OUTPUT 711;"DISP:TRACE:X:RIGHT -1.10689e+37"
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:RIGHt?
Real
Option: not applicable
Synchronization Required:
Preset State: +5.12E+04 HZ (Trace A)
+5.12E+04 HZ (Trace B)
+7.805E-03 S (Trace C)
+7.805-03 S (Trace D)
SCPI Compliance:
no
confirmed
command/query