Agilent Technologies 35670A Manual page 545

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

SOURce:VOLTage[:LEVel]:REFerence:CHANnel

Selects the reference input channel for the autolevel feature in swept sine measurements (INST:SEL

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies which input channel the analyzer monitors when the autolevel is enabled

(SOUR:VOLT:AUTO ON). The analyzer adjusts the source output to keep the amplitude of this input

channel within the range specified with the SOURce:VOLTage[:LEVel]:REFerence.

SOURce:VOLTage[:LEVel]:REFerence:CHANnel INPut1|INPut2|

INPut3|INPut4

OUTPUT 711;":Sour:Voltage:Ref:Channel INPUT2"

OUTPUT 711;"SOUR:VOLT:LEVEL:REF:CHANNEL INPUT1"

SOURce:VOLTage[:LEVel]:REFerence:CHANnel?

INP1|INP2|INP3|INP4

1D2 Swept Sine

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query