Agilent Technologies 35670A Manual page 337

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

HCOPy:PLOT:ADDRess

Tells the analyzer which GPIB address is assigned to your plotter.

Command Syntax:

<number> ::= a real number (NRf data)

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command works when the HCOP:DESTination command is set to GPIB and the HCOP:DEVice

command is set to PLOT.

Initiate a plot with the HCOPy[:IMM] command. The analyzer expects to find a plotter at the GPIB

address specified with HCOP:PLOT:ADDR. If a plotter is not at the specified address, the plot is

automatically aborted.

HCOPy:PLOT:ADDRess <number>|<step>|<bound>

OUTPUT 711;"HCOPY:PLOT:ADDRESS 5"

OUTPUT 711;"hcop:plot:addr 9"

HCOPy:PLOT:ADDRess?

not applicable

Synchronization Required:

Preset State:

not affected by Preset

SCPI Compliance:

instrument-specific

command/query