Agilent Technologies 35670A Manual page 292

DISPlay
DISPlay[:WINDow[1|2|3|4]]:TRACe:Y[:SCALe]:PDIVision
Defines the height of each vertical division on the specified trace.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [DB|VRMS|VPK|V]
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command compresses or expands displayed data along the Y-axis. The value specifies the height of
each vertical division. When trace coordinates are log magnitude (CALC:FORM
MLIN;DISP:WIND:TRAC:Y:SPAC LOG), the value specifies the number of displayed decades.
The trace specifier, WINDow [1|2|3|4], determines which trace you are selecting. Omit the specifier or
send WIND1 for trace A, WIND2 for B, WIND3 for C, or WIND4 for D.
The preset value for trace B and trace D is determined by the input range.
When trace coordinates are dB magnitude (CALC:FORM MLOG) the only valid unit selection is dB.
See "Determining Units" in appendix E for information about available Y-axis units.
8-38
DISPlay[:WINDow[1|2|3|4]]:TRACe:Y[:SCALe]:PDIVision
{<number>[<unit>]}|<step>|<bound>
limits: 0:9.9e37
OUTPUT 711;"display:wind:trac:y:scal:pdivision
9.20888e+37"
OUTPUT 711;"Disp:Trac:Y:Pdiv 4.5054e+37"
DISPlay[:WINDow[1|2|3|4]]:TRACe:Y[:SCALe]:PDIVision?
Real
Option: not applicable
Synchronization Required:
Preset State: +10.00 (Trace A and Trace C)
SCPI Compliance:
no
instrument-specific
command/query