Agilent Technologies 35670A Manual page 187

CALCulate[1|2|3|4]:MARKer:MODE
Selects absolute or relative marker values.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
To select relative marker values, send CALC:MARK:MODE REL. A marker reference is displayed and
marker values are reported as distances between the reference point and the relative marker position.
To select absolute marker values, send CALC:MARK:MODE ABS. The marker values are reported as
the position of the marker on the trace.
The trace specifier, CALCulate[1|2|3|4], determines which trace you are selecting. Omit the specifier or
send 1 for trace A, 2 for trace B, 3 for trace C, or 4 for trace D.
CALCulate[1|2|3|4]:MARKer:MODE ABSolute|RELative
OUTPUT 711;":calculate4:mark:mode ABSOLUTE"
OUTPUT 711;"Calc:Mark:Mode RELATIVE"
CALCulate[1|2|3|4]:MARKer:MODE?
ABS|REL
Option: not applicable
Synchronization Required:
Preset State: ABSolute
SCPI Compliance:
no
instrument-specific
CALCulate
command/query
6-79