Agilent Technologies 35670A Manual page 251

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALibration:AUTO

Calibrates the analyzer or sets the state of the autocalibration function.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

Send CAL:AUTO ON to enable the analyzer's autocalibration function, OFF to disable it. This function

calibrates the analyzer several times during the first hour of operation and once per 140 minutes

Send CAL:AUTO ONCE to initiate a single calibration.

CAL:AUTO is set to +0 (OFF) after *RST.

CALibration:AUTO OFF|0|ON|1|ONCE

OUTPUT 711;"calibration:auto OFF"

OUTPUT 711;"Cal:Auto ONCE"

CALibration:AUTO?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

command/query