Agilent Technologies 35670A Manual page 608

SYSTem
SYSTem:PRESet
Returns most of the analyzer's parameters to their preset states.$Ipreset;device
Command Syntax:
Example Statements:
Attribute Summary:
Description:
In addition to returning parameters to their preset states, this command does all of the following:
Aborts any GPIB operations.
Cancels any pending *OPC command or query.
Clears the error queue.
Clears all event registers (sets all bits to 0).
The preset state of each parameter is listed under the Attribute Summary of the associated command.
Note
This command is equivalent to the front panel Preset hardkey.
SYST:PRES does not affect the following parameters:
the state of the Power-on Status Clear flag
the state of all enable and transition registers
the GPIB input and output queues
the time and date (SYST:TIME and SYST:DATE)
the GPIB address settings (SYST:COMM:GPIB:ADDR, HCOP:PLOT:ADDR, HCOP:PRIN:ADDR)
the GPIB controller capability setting
the default disk selection (MMEM:MSIS)
the serial interface (RS-232-C) parameter settings (SYST:COMM:SERial)
contents of limit, data, and waterfall registers
contents of the math function and constant registers
contents of the RAM disks
calibration constants
contents of the time capture buffer
the external keyboard selection
21-24
SYSTem:PRESet
OUTPUT 711;"Syst:Pres"
OUTPUT 711;"SYSTEM:PRES"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
confirmed
command