Agilent Technologies 35670A Manual page 219

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:UNIT:AMPLitude

Selects the unit of amplitude for the Y-axis scale.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

To display peak amplitude, send CALC:UNIT:AMPL PEAK.

To display peak-to-peak amplitude, send CALC:UNIT:AMPL PP.

To display RMS amplitude, send CALC:UNIT:AMPL RMS.

The default value is dependent upon the selected measurement data (CALC:FEED). Table 6-6 indicates

valid unit selections for the CALC:UNIT:AMPL command. If measurement data does not appear in the

table, you are not permitted to select the amplitude. In this case, a query returns a null string. See

"Determining Units" in Appendix E for information about available Y-axis units.

CALCulate[1|2|3|4]:UNIT:AMPLitude PEAK|PP|RMS

OUTPUT 711;"CALC3:UNIT:AMPL PP"

OUTPUT 711;"calculate4:unit:ampl PP"

CALCulate[1|2|3|4]:UNIT:AMPLitude?

not applicable

Synchronization Required:

Preset State:

RMS (Channel 1 and Channel 3)

PEAK (Channel 2 and Channel 4)

SCPI Compliance:

instrument-specific

command/query