Calculate[1|2|3|4]:Waterfall:slice:copycommand - Agilent Technologies 35670A Manual

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:LIMit:LOWer:MOVE:Y

Moves all segments of the lower limit line up or down in the specified trace.

Command Syntax:

<number> ::= a real number (NRf data)

<bound> ::= MAX|MIN

Example Statements:

Attribute Summary:

Description:

This command increments or decrements all segments in a lower limit by the specified value along the

Y-axis. The value is unitless and assumes the current vertical/division unit (returned with

DISP:TRAC:Y:PDIV? UNIT).

To specify trace box A, send CALC1:LIM:LOW:MOVE:Y. To specify trace box B, send

CALC2:LIM:LOW:MOVE:Y. To specify trace box C, send CALC3:LIM:LOW:MOVE:Y. To specify

trace box D, send CALC4:LIM:LOW:MOVE:Y. If a trace specifier is not included in the command, the

trace specifier defaults to trace box A.

CALCulate[1|2|3|4]:LIMit:LOWer:MOVE:Y <number>|<bound>

limits: -9.9e37:9.9e37

(depend upon current verticall/division unit)

OUTPUT 711;"Calculate4:Lim:Lower:Move:Y 9.55849e+37"

OUTPUT 711;"CALCULATE:LIM:LOWER:MOVE:Y -3.82565e+37"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific