Calculate[1|2|3|4]:Synthesis:fscalecommand/Query - Agilent Technologies 35670A Manual

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:CFIT:FREQuency:STARt

Specifies the start frequency for a curve fit operation over a limited frequency span.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [HZ]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

OUTPUT 711;"CALC4:CFIT:FREQ:START 10.2"

OUTPUT 711;"calc3:cfit:frequency:star 600"

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command is not valid unless the CALC:CFIT:FREQ OFF command has been sent.

This command is not trace specific. It ignores the trace specifier.

CALCulate[1|2|3|4]:CFIT:FREQuency:STARt {<num-

ber>[<unit>]}|<step>|<bound>

0:114999.9023

CALCulate[1|2|3|4]:CFIT:FREQuency:STARt?

1D3 Curve Fit/Synthesis

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query