Agilent Technologies 35670A Manual page 492

[SENSe:]
[SENSe:]ORDer:RPM:MAXimum
Specifies the maximum rotational speed range you want to analyze.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [RPM]
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
For runup measurements, the measurement stops at the speed specified by this command.
For rundown measurements, the measurement starts at the speed specified by this command and
continues to the minimum RPM (ORD:RPM:MIN).
If the value you specify for ORD:RPM:MAX is less than the value set for ORD:RPM:MIN, the value for
ORD:RPM:MIN is set to equal the value of ORD:RPM:MAX.
If
ORD:RPM:MAX < ORD:RPM:MIN
then
ORD:RPM:MIN = ORD:RPM:MAX
If the value you specify for ORD:RPM:MIN is greater than the value set for ORD:RPM:MAX, the value
for ORD:RPM:MAX is set to equal the value of ORD:RPM:MIN.
If
ORD:RPM:MIN > ORD:RPM:MAX
then
ORD:RPM:MIN = ORD:RPM:MAX
18-54
[SENSe:]ORDer:RPM:MAXimum {<number>[<unit>]}|<step>|
<bound>
limits: 0:9.9e37
OUTPUT 711;"ORD:RPM:MAX 5000"
OUTPUT 711;"order:rpm:maximum 1e3"
[SENSe:]ORDer:RPM:MAXimum?
Real
Option: 1D0 Computed Order Tracking
Synchronization Required:
Preset State: +6000
SCPI Compliance:
no
instrument-specific
command/query