Agilent Technologies 35670A Manual page 287

DISPlay[:WINDow[1|2|3|4]]:TRACe:X:SPACing
Specifies X-axis scaling.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The trace specifier, WINDOW[1|2|3|4], determines which trace you are selecting. Omit the specifier or
send 1 for trace A, 2 for trace B, 3 for trace C, or 4 for trace D.
To select linear scaling of the X-axis, send DISP:TRAC:X:SPAC LIN.
To select logarithmic scaling the X-axis, send DISP:TRAC:X:SPAC LOG.
DISPlay[:WINDow[1|2|3|4]]:TRACe:X:SPACing LINear|LOGa-
rithmic
OUTPUT 711;":disp:trac:x:spac LINEAR"
OUTPUT 711;"Display:Wind4:Trac:X:Spac LOGARITHMIC"
DISPlay[:WINDow[1|2|3|4]]:TRACe:X:SPACing?
LIN|LOG
Option: not applicable
Synchronization Required:
Preset State: LIN
SCPI Compliance:
no
confirmed
DISPlay
command/query
8-33