Agilent Technologies 35670A Manual page 464

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]FEED

Specifies the data source for a measurement; either from the input channels or from the time capture

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

Data from the time capture buffer may be used for a measurement, replacing the use of the inputs

(channels 1, 2, 3, and 4). This command directs the analyzer to use the data in the time capture buffer for

the measurement.

The measurement does not begin until the INITiate command is sent.

[SENSe:]FEED INPut|TCAPture

OUTPUT 711;":Feed TCAPTURE"

OUTPUT 711;"SENS:FEED TCAPTURE"

[SENSe:]FEED?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query