Agilent Technologies 35670A Manual page 510

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]TCAPture:LENGth

Specifies the length of the time capture buffer.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S|BLK|PNT]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

If length is specified in seconds, the size of the buffer is relative to the frequency span.

If length is specified in blocks or points, the size of the buffer is absolute. There are 1024 sample points

Any specified length is rounded up to the nearest block.

The maximum capture length is dependent upon the memory configuration:

[SENSe:]TCAPture:LENGth {<number>[<unit>]}|<step>|<bound>

OUTPUT 711;":Tcapture:Leng 4.54329e+36"

OUTPUT 711;"SENS:TCAPTURE:LENG 2.91628e+37"

[SENSe:]TCAPture:LENGth?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query