Agilent Technologies 35670A Manual page 229

CALCulate[1|2|3|4]:UNIT:X
Specifies the X-axis unit.
Command Syntax:
<UNIT> ::= 'HZ'|"HZ"
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
Send CALC:UNIT:X 'HZ' to specify Hertz for frequency domain X-axis units and seconds for time
domain X-axis units.
Send CALC:UNIT:X 'CPM' to specify CPM for frequency domain X-axis units and seconds for time
domain X-axis units.
Send CALC:UNIT:X 'ORD' to specify orders for frequency domain X-axis units and revolutions for time
domain X-axis units. Use the CALC:UNIT:X:ORDER:FACTor command to specify the Hertz/Order or
RPM/Order ratio.
Send CALC:UNIT:X 'USER' to specify your own X-axis units. Use the
CALC:UNIT:X:USER:FREQuency:FACTor or the CALC:UNIT:X:USER:TIME:FACTor commands to
specify the conversion factor. You can specify a name for the units with the
CALC:UNIT:X:USER:FREQuency:LABel or the CALC:UNIT:X:USER:TIME:LABel commands.
CALCulate[1|2]:UNIT:X <UNIT>
'CPM'|"CPM"
'ORD'|"ORD"
'USER'|"USER"
OUTPUT 711;"CALC:UNIT:X 'RPM'"
OUTPUT 711;"calculate2:unit:x 'USER'"
CALCulate[1|2|3|4]:UNIT:X?
"HZ|"CPM"|"ORD"|"USER"
Option: not applicable
Synchronization Required:
Preset State: "HZ"
SCPI Compliance:
yes
instrument-specific
CALCulate
command/query
6-121