Agilent Technologies 35670A Manual page 706

Error Messages
Execution Errors
Fit aborted. Trace A data must be complex.
Fit aborted. Trace A data must be in frequency domain.
Fit aborted. Trace A is a constant. Does not have finite poles or zeros.
Fit aborted. User span completely outside trace A boundaries.
Fit aborted. Weight data cannot be negative.
Fit aborted. Weight register data invalid.
Fit or Synth table data invalid.
Fit or Synth table data invalid. Found an invalid floating point value.
Fit or Synth table data invalid. System order greater than 20.
Fit or Synth table data invalid. Table value outside valid range.
Fit table format invalid. Only pole zero format allowed.
Function definition contains references to Meas Data selections that are not available in this Inst Mode.
Function definition is not valid.
Function definition is too long.
Function definition may not reference higher numbered functions.
GPIB control not received.
Initial RPM [RPM value] < Min RPM.
Initial RPM [RPM value] > Max RPM.
Input Range tracking not valid on this data.
Instrument BASIC not installed.
Instrument must be in either FFT ANALYSIS or SWEPT SINE mode.
Invalid Function Code.
Invalid Instrument State Request.
Invalid Instrument State Value.
Invalid Instrument State.
Invalid TRACE COORD selection.
LOG X AXIS invalid with NYQUIST or ORBIT.
Limit table invalid.
Limit testing is turned off.
Limits are not allowed on ORBITs, NYQUIST or POLAR Trace Coordinates, or data with arbitrarily spaced x
axis values.
Limits are undefined.
Limits not allowed with WATERFALL ON.
MEAS DATA selection not available with Inst Mode CORRELATN ANALYSIS.
MEAS DATA selection not available with Inst Mode FFT ANALYSIS.
MEAS DATA selection not available with Inst Mode HISTOGRAM.
MEAS DATA selection not available with Inst Mode OCTAVE ANALYSIS.
MEAS DATA selection not available with Inst Mode ORDER ANALYSIS.
MEAS DATA selection not available with Inst Mode SWEPT SINE.
MEAS DATA selection only available with four active channels (Inst Mode, CHANNELS 4).
MEAS DATA selection only available with two or more active channels (Inst Mode, CHANNELS 2 or
CHANNELS 4).
MEAS DATA selection requires TRACK OFF (Key Path: [Freq]).
MEAS DATA selection requires TRACK ON (Key Path: [Freq]).
Marker Function invalid for non frequency domain MEASurement DATA.
Marker Function invalid for non time domain MEASurement DATA.
Marker Function invalid with WATERFALL ON.
Math not valid. [Specified math] operation cannot process a data block this large.
C-4