Agilent Technologies 35670A Manual page 709

Error Messages
Execution Errors
Arm ignored when arm type is not MANUAL ARM.
Arm received when not waiting for arm.
Invalid Instrument State Parameter.
Capture does not contain tach data.
Capture frequency is not compatible with this measurement.
Data edit invalid for Display Format WATERFALL.
Invalid program state change requested.
LogX not valid for negative X axis.
Marker function result not available.
Meas Data selection invalid for Display Format WATERFALL.
Measurement mode incompatible with command.
No TRIGGER With SWEPT SINE Instrument Mode.
No WATERFALL display with DATA REGISTER, ORBIT, or CAPTURE data.
No WATERFALL display with ORBIT Meas Data or NYQUIST or POLAR Trace Coord .
No WATERFALL display with ORDER ANALYSIS Instrument Mode and TRACK ON.
No WATERFALL display with ORDER TRACK data.
No WATERFALL display with SWEPT SINE Instrument Mode.
No WINDOW With HISTOGRAM Instrument Mode.
No WINDOW With OCTAVE Instrument Mode.
No WINDOW With SWEPT SINE Instrument Mode.
SOURCE LEVEL is 0 Volts, measurement paused.
Synthesis table must be pole-zero.
Zoom capture data cannot be used with this measurement.
Data out of range.
Out of range: value not changed.
REAL format length is only 32 and 64.
Data does not contain SDF header information.
Hardware error (see Fault Log).
OPTION AY6 Add 2 Input Channels not installed.
Bad mass storage parameter.
Bad or unformatted disk.
C-7