Agilent Technologies 35670A Manual page 299

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

DISPlay[:WINDow[1|2|3|4]]:WATerfall:COUNt

Determines the number of traces displayed in the waterfall trace box.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S|RPM|COUNT|AVG]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

The number of traces displayed in a waterfall is determined by the range of Z-axis values specified with

this command. The analyzer may adjust the specified range to include the trace selected with the

CALC:WAT:TRAC:SEL command.

WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to

specify C, and WIND4 to specify D. If you do not send the optional trace box specifier, the command

defaults to trace box A.

All traces in a waterfall display are deleted when the ABORT;:INIT:CONT ON

command is sent.

DISPlay[:WINDow[1|2|3|4]]:WATerfall:COUNt {<num-

ber>[<unit>]}|<step>|<bound>

OUTPUT 711;":Display:Wat:Coun 5"

OUTPUT 711;"DISP:WIND2:WAT:COUNT 100 RPM"

DISPlay[:WINDow[1|2|3|4]]:WATerfall:COUNt?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query