Calculate[1|2|3|4]:Limit:upper:report[:Data]?Query - Agilent Technologies 35670A Manual

Introduction to the Command Reference
The Command Reference chapters describe all of the Agilent 35670A's GPIB commands. Each
command has the following:
A brief description of the command. This one- or two-line description appears just below the
heading.
A syntax description. This consists of two fields. One field specifies whether the command has
only a command form, only a query form, or both. The other field shows you the syntax expected
by the analyzer's GPIB command parser. At the end of this chapter is a detailed description for the
elements appearing in the syntax description. Additional information about message syntax is also
available in the GPIB Programmer's Guide.
2-1. Sample Command Reference Page
2
1
2
3
4
5
6
2-1