Agilent Technologies 35670A Manual page 155

CALCulate[1|2|3|4]:LIMit:UPPer:REPort:YDATa?
Returns the Y-axis value of the failed points for the upper limit test.
Query Syntax:
Example Statements:
Return Format:
When data is ASCII-encoded, (FORMat ASCii) <DEF_BLOCK> takes the following form:
<DEF_BLOCK> ::= [<Y-axis value>,<Y-axis value> . . .]
When data is binary-encoded, (FORMat REAL) <DEF_BLOCK> takes the following form:
<DEF_BLOCK> ::= #<byte><length_bytes>[<Y-axis value>,<Y-axis value> . . .]
<byte> ::= one ASCII-encoded byte specifying the
<length_bytes> ::= ASCII-encoded bytes specifying
The following definitions apply to both ASCII- and binary-encoded data.
<Y-axis value> ::= a real number (Y-axis value
Attribute Summary:
Description:
This query returns the Y-axis value for data points which fail the upper limit test.
Data is not returned if limit testing is turned off (CALC:LIM:STAT OFF) or if all trace points are below
the specified upper limit.
CALCulate[1|2|3|4]:LIMit:UPPer:REPort:YDATa?
OUTPUT 711;":Calculate:Lim:Upp:Report:Ydat?"
OUTPUT 711;"CALCULATE:LIM:UPP:REPORT:YDAT?"
<DEF_BLOCK>
length bytes to follow
data bytes to follow
limits: -9.9e+37 : 9.9e+37
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
the number of
of the failed point)
no
instrument-specific
CALCulate
query
number of
6-47