Agilent Technologies 35670A Manual page 111

CALCulate[1|2|3|4]:ACTive
Selects the active trace(s).
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
In addition to the individual traces, you can set multiple traces to be active at any time.
The trace pairs of A/B or C/D can be active as well as all four traces—A/B/C/D. If A/B or A/B/C/D are
active, trace A is considered the "most active trace." If traces C/D are active, trace C is considered the
"most active trace."
The trace pairs of A/C or B/D cannot be active at the same time.
The trace specifier, CALCULATE[1|2|3|4], is not used.
CALCulate[1|2|3|4]:ACTive A|B|C|D|AB|CD|ABCD
OUTPUT 711;"CALC4:ACTIVE C"
OUTPUT 711;"calc4:active ABCD"
CALCulate[1|2|3|4]:ACTive?
A|B|C|D|AB|CD|ABCD
Option: not applicable
Synchronization Required:
Preset State: trace A
SCPI Compliance:
no
instrument-specific
CALCulate
command/query
6-3