Agilent Technologies 35670A Manual page 599

SYSTem:FLOG:CLEar
Clears the fault log of all entries.
Command Syntax:
Example Statements:
Attribute Summary:
Description:
The fault log lists any hardware failures. This command deletes all lines in the fault log.
If any test fails, contact your local Agilent Technologies Sales and Service Office or have a qualified
service technician refer to the Agilent 35670A Service Manual .
SYSTem:FLOG:CLEar
OUTPUT 711;"syst:flog:clear"
OUTPUT 711;"Syst:Flog:Cle"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
SYSTem
command
21-15