Agilent Technologies 35670A Manual page 208

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:MATH:STATe

Evaluates the currently selected math operation for the specified trace and displays the results.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

CALC:MATH:STATE must be ON to perform math operations.

Use CALCulate [1|2|3|4] to specify the trace. Omit the specifier or send 1 for trace A, 2 for trace B, 3 for

trace C, or 4 for trace D.

To define a math function, use CALC:MATH:EXPR or CALC:MATH:DATA. (To define the value of

the constant registers, use the CALC:MATH:CONS command.) Select the function with the

CALC:MATH:SEL command. Execute the function and display the results with the

CALC:MATH:STAT ON command.

CALC:MATH:STATE OFF turns off math operations. You cannot execute or display a math operation

unless CALC:MATH:STATE is ON.

Each trace box always has a selected math function. When the analyzer receives the

CALC[1|2|3|4]:MATH:STAT ON command, it evaluates the selected function and

displays the results in the specified trace box. If a trace box is not specified, the function

defaults to trace box A.

When the analyzer receives the CALC[1|2|3|4]:MATH:STAT off, it stops evaluating the

function. The analyzer returns the data it was displaying in the trace box before

receiving the CALC:MATH:STAT ON command.

CALCulate[1|2|3|4]:MATH:STATe OFF|0|ON|1

OUTPUT 711;"calculate2:math:state OFF"

OUTPUT 711;"Calc:Math:State ON"

CALCulate[1|2|3|4]:MATH:STATe?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

command/query