Agilent Technologies 35670A Manual page 232

CALCulate
CALCulate[1|2|3|4]:UNIT:X:USER:FREQuency:FACTor
Specifies the frequency conversion factor for user-defined X-axis units.
Command Syntax:
<number> ::= a real number (NRf data)
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
Use this command with the CALC:UNIT:X 'USER' command for frequency domain traces.
The value you specify is entered as the number of Hertz per X-axis unit. For example, if the unit is
'cpm', the value accompanying CALC:UNIT:X:USER:FREQ:FACTOR is interpreted as Hertz/cpm.
The trace specifier, CALCulate[1|2|3|4], determines which trace you are selecting. Omit the specifier or
send 1 for trace A, 2 for trace B, 3 for trace C, or 4 for trace D.
6-124
CALCulate[1|2|3|4]:UNIT:X:USER:FREQuency:FACTor <number>|
<step>|<bound>
limits: 1e-15:1e+15
OUTPUT 711;"CALC:UNIT:X:USER:FREQUENCY:FACTOR 1.667e-2"
OUTPUT 711;"calc:unit:x:user:freq:fact 0.159"
CALCulate[1|2|3|4]:UNIT:X:USER:FREQuency:FACTor?
Real
Option: not applicable
Synchronization Required:
Preset State: 1
SCPI Compliance:
yes
instrument-specific
command/query