Calculate[1|2|3|4]:Synthesis:destinationcommand/Query - Agilent Technologies 35670A Manual

CALCulate[1|2|3|4]:CFIT:FREQuency[:AUTO]
Specifies the region included in the curve fit operation.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
To specify the full span send CALC:CFIT:FREQ ON.
To limit the region of the curve fit send CALC:CFIT:FREQ OFF. The commands,
CALC:CFIT:FREQ:STAR and CALC:CFIT:FREQ:STOP define the region of a curve fit over a limited
span.
Note
This command is not trace specific. It ignores the trace specifier.
CALCulate[1|2|3|4]:CFIT:FREQuency[:AUTO] OFF|0|ON|1
OUTPUT 711;":calculate2:cfit:freq ON"
OUTPUT 711;"Calculate:Cfit:Frequency:Auto OFF"
CALCulate[1|2|3|4]:CFIT:FREQuency[:AUTO]?
Integer
Option: 1D3 Curve Fit/Synthesis
Synchronization Required:
Preset State: ON
SCPI Compliance:
no
(+1)
instrument-specific
CALCulate
command/query
6-9