Agilent Technologies 35670A Manual page 748

Example Programs
COPYDATA
Comments for COPYDATA
Determines where the program is running; either in the analyzer or on an external controller.
90 - 170
Specify interface select code and primary address for Instrument BASIC.
100
Specify analyzer's interface select code and primary address when the program is running on an
150
external computer. The specified primary address, 11, is the address set at the factory. If the
address for your analyzer has changed, edit the primary address to the appropriate value.
Allows device select code to be independent of address.
200
Reset the analyzer.
230
Start the measurement.
240
Copy trace A to data register D1.
260
Specify the Upper/Lower display format
290
Display D1 in trace B.
300
F-10