Agilent Technologies 35670A Manual page 328

HCOPy
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:COLor
Selects the pen used to plot the specified trace and annotation.
Command Syntax:
<number> ::= a real number (NRf data)
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The trace pen is used to plot traces and all of the following trace-specific annotation:
Trace title
Marker readout
X-axis annotation
Y-axis annotation
The trace specifier you send with this command determines which trace you are selecting. Omit the
specifier or send 1 for trace A; send 2 for trace B; send 3 for trace C; send 4 for trace D.
Nothing is plotted with a pen whose value is specfied as 0 or with a pen whose specified value is too large
for your plotter.
10-14
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:COLor <num-
ber>|<step>|<bound>
limits: 0:16
OUTPUT 711;"HCOP:ITEM:WIND3:TRAC:COL 0"
OUTPUT 711;":hcopy:item:window:trace:color 6"
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:COLor?
Integer
Option: not applicable
Synchronization Required:
Preset State: +2 (TRACeA)
+3 (TRACeB)
+5 (TRACeC)
+6 (TRACeD)
SCPI Compliance:
no
approved
command/query