Agilent Technologies 35670A Manual page 285

DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:LEFT
Specifies the first X-axis value on the display.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command specifies the value of the first (most left) X-axis point on the display.
The trace specifier, WINDow [1|2|3|4], determines which trace you are selecting. Omit the specifier or
send WIND1 for trace A, WIND2 for B, WIND3 for C, or WIND4 for D.
To determine the X-axis unit, send DISP:TRAC:X:LEFT? UNIT.
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:LEFT {<number>
[<unit>]}|<bound>
limits: -9.9e37:9.9e37
OUTPUT 711;":DISP:TRAC:X:LEFT -8.83941e+37"
OUTPUT 711;"display:wind2:trac:x:scal:left 5.61155e+37"
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:LEFT?
Real
Option: not applicable
Synchronization Required:
Preset State: +0.0 HZ (Trace A)
+0.0 HZ (Trace B)
+0.0 S (Trace C)
+0.0 S (Trace D)
SCPI Compliance:
no
confirmed
DISPlay
command/query
8-31