Agilent Technologies 35670A Manual page 170

CALCulate
CALCulate[1|2|3|4]:MARKer:DTABle:X:DELete
Deletes the selected entry in the data table.
Command Syntax:
Example Statements:
Attribute Summary:
Description:
To select the X value entry in the data table, use the CALC:MARKER:DTAB:X:SELECT[:POINT]
command.
CALCulate[1|2|3|4] specifies the data table. Send CALC1 to specify the data table appearing in trace box
A, CALC2 to specify B, CALC3 to specify C, and CALC4 to specify D. If you do not send the optional
specifier, the command defaults to the data table appearing in trace box A.
To display the data table, use the DISPlay[:WINDow[1|2|3|4]]:DTABle[:STATe] command.
6-62
CALCulate[1|2|3|4]:MARKer:DTABle:X:DELete
OUTPUT 711;"calc:mark:dtable:x:delete"
OUTPUT 711;"Calc3:Mark:Dtable:X:Delete"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
command