Agilent Technologies 35670A Manual page 401

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

MMEMory:STORe:CONTinue

Splits a large file (a time capture file or a waterfall file) over multiple disks.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command splits files created by the MMEM:STOR:WAT and the MMEM:STOR:TCAP commands

If the buffer is too large for the disk when you send the MMEM:STOR:WAT or MMEM:STOR:TCAP

command, an error, "Media full; File too large" is generated. Send the MMEM:STOR:CONT command

to begin the save operation. (The error message is generated before the save operation is implemented).

MMEM:STOR:CONT adds a numeric specifier to the <filename>. Split files appear as filename_1,

filename_2, etc. in the disk catalog (see VIEW:CONT MMEM).

MMEM:STORE CONT? returns a +1 if the analyzer has not completely saved the time capture file or

waterfall file. Insert the new disk and send the MMEM:STORE:CONT command to continue the save

operation. The query returns a 0 when the entire time capture or waterfall has been saved.

MMEMory:STORe:CONTinue

OUTPUT 711;"mmem:store:cont"

OUTPUT 711;"Mmem:Store:Cont"

MMEMory:STORe:CONTinue?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific

command/query