Agilent Technologies 35670A Manual page 442

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]AVERage:HOLD

Specifies the type of hold used in averaging octave measurements.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies the type of average hold used for octave measurements. It is valid when used

Linear averaging (AVER:TYPE RMS).

Exponential averaging (AVER:TYPE RMS;TCON EXP).

Equal confidence averaging (AVER:TYPE ECON).

If you send AVER:HOLD MAX, the analyzer displays the maximum averaged spectrum value for each

If you send AVER:HOLD MIN, the analyzer displays the minimum averaged spectrum value for each

band. This is useful for estimating background noise.

AVERage:HOLD differs from the peak hold function. See the AVER:TYPE MAX

command description for information about the peak hold function.

[SENSe:]AVERage:HOLD OFF|0|MAXimum|MINimum

OUTPUT 711;"sens:average:hold MINIMUM"

OUTPUT 711;"Aver:Hold OFF"

[SENSe:]AVERage:HOLD?

1D1 Realtime Octave

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query