Agilent Technologies 35670A Manual page 378

MMEMory
MMEMory:DELete
Deletes one file or the contents of an entire disk.
Command Syntax:
<MMEMNAME> ::= '<disk>[<dos_dir>][<filename>]'
<disk> ::= NVRAM:|RAM:|INT:|EXT[,<select_code>[,<unit_number>]]:
<select_code> ::= a real number (NRf data)
<unit_number> ::= a real number (NRf data)
<dos_dir> ::= directory_name
<directory_name> ::= ASCII characters
<filename> ::= ASCII characters (see beginning of chapter
Example Statements:
Attribute Summary:
Description:
To delete all files from a mass storage device only specify the <disk>. The select code and unit number
specifiers are valid only with the EXT: disk specifier.
You can use the "*" as a wildcard (for example, '*.DAT').
Note
When accessing the external mass storage device (EXT:); the active controller on the
GPIB must temporarily pass control to the analyzer. After the command has been
executed, the analyzer must pass control back. See in the GPIB Programmer's Guide for
more information on passing control.
15-4
MMEMory:DELete <MMEMNAME>
limits: 700:730
limits: 0:3
(DOS only)
for <filename> restrictions)
OUTPUT 711;"MMEMORY:DEL 'INT:JUNK'"
OUTPUT 711;"mmem:del 'ext:state.sta'"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
yes, for EXT only
confirmed
command