Agilent Technologies 35670A Manual page 197

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:MARKer[:STATe]

Turns on the main markers or turns off all markers and marker functions for a selected trace.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

To display the main marker and its annotation, send CALC:MARK ON. The analyzer displays the X-axis

and Y-axis values at the top of the grid.

To disable the display of the main markers and the marker reference for the active trace, send

CALC:MARK OFF.

The trace specifier, CALCulate[1|2|3|4], determines which trace you are selecting. Omit the specifier or

send 1 for trace A, 2 for trace B, 3 for trace C, or 4 for trace D.

All markers and marker functions operate on the specified trace, whether or not the trace

is displayed.

CALCulate[1|2|3|4]:MARKer[:STATe] OFF|0|ON|1

OUTPUT 711;":CALCULATE3:MARK OFF"

OUTPUT 711;"calculate:mark:stat OFF"

CALCulate[1|2|3|4]:MARKer[:STATe]?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query