Agilent Technologies 35670A Manual page 476

[SENSe:]
[SENSe:]FREQuency:RESolution:OCTave
Specifies the type of octave measurement.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
To select 1/1 octave band measurements, send FREQ:RES:OCT FULL. The center frequency of any
band is twice the center frequency of the previous band. The analyzer displays a minimum of 1 frequency
band, a maximum of 12 frequency bands, a weighted overall band and an overall band. See table 18-6 for
the minimum start frequency and the maximum stop frequency.
To select 1/3 octave band measurements, send FREQ:RES:OCT THIR. The center frequency of each 1/3
octave frequency band is located at a frequency of 2
analyzer displays a minimum of 3 frequency bands, a maximum of 33 frequency bands, a weighted
overall band, and an overall band. See table 18-6 for the minimum start frequency and the maximum stop
frequency.
To select 1/12 octave band measurements, send FREQ:RES:OCT TWEL. The center frequency of each
1/12 octave frequency band is located at a frequency of 2
The analyzer displays a minimum of 12 frequency bands, a maximum of 144 frequency bands, a weighted
overall band, and an overall band. See table 18-6 for the minimum start frequency and the maximum stop
frequency.
The analyzer maintains a minimum of one octave and a maximum of twelve octaves. It may decrease the
start frequency or increase the stop frequency to meet this constraint. To specify start and stop
frequencies, send the FREQ:STAR and FREQ:STOP commands.
18-38
[SENSe:]FREQuency:RESolution:OCTave THIRd|FULL|TWELfth
OUTPUT 711;":frequency:res:oct THIRD"
OUTPUT 711;"Sense:Freq:Resolution:Oct THIRD"
[SENSe:]FREQuency:RESolution:OCTave?
THIR|FULL|TWEL
Option: 1D0 Computed Order Tracking
Synchronization Required:
Preset State: THIRd
SCPI Compliance:
no
instrument-specific
(1/3) times the preceding 1/3 octave band. The
(1/12)
times the preceding 1/12 octave band.
command/query