Agilent Technologies 35670A Manual page 265

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

DISPlay:PROGram[:MODE]

Selects the portion of the analyzer's screen to be used for Instrument BASIC program output.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

FULL allocates the entire trace box for program output. UPP allocates the upper trace box. LOW

allocates the lower trace box.

If DISP:PROG is OFF, the analyzer does not allocate any portion of the trace box for program output.

This command will change the display format (DISP:FORM) if the format is not compatible with the

DISP:PROG selection.

DISPlay:PROGram[:MODE] OFF|0|FULL|UPPer|LOWer

OUTPUT 711;"display:prog:mode LOWER"

OUTPUT 711;"Disp:Prog LOWER"

DISPlay:PROGram[:MODE]?

OFF|FULL|UPP|LOW

1C2 Instrument BASIC

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query