Agilent Technologies 35670A Manual page 296

DISPlay
DISPlay[:WINDow[1|2|3|4]]:TRACe:Y:SPACing
Specifies scaling of the Y-axis for linear magnitude coordinate data.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The trace specifier, WINDOW[1|2|3|4], determines which trace you are selecting. Omit the specifier or
send 1 for trace A, 2 for trace B, 3 for trace C, or 4 for trace D.
To display linear magnitude coordinate data on a linear Y- axis scale, send DISP:TRAC:Y:SPAC LIN.
To display linear magnitude coordinate data on a logarithmic Y-axis scale, send DISP:TRAC:Y:SPAC
LOG.
Use this command with the CALC:FORM MLIN command to display linear magnitude data on a
logarithmic Y-axis scale, CALC:FORM;MLIN;:DISP:TRAC:Y:SPAC LOG.
Note
Only magnitude data can be displayed on a logarithmic Y-axis scale.
8-42
DISPlay[:WINDow[1|2|3|4]]:TRACe:Y:SPACing LINear|LOGa-
rithmic
OUTPUT 711;":Display:Trac:Y:Spacing Logarithmic"
OUTPUT 711;"DISP:WIND3:TRAC:Y:SPAC LIN"
DISPlay[:WINDow[1|2|3|4]]:TRACe:Y:SPACing?
LIN|LOG
Option: not applicable
Synchronization Required:
Preset State: LIN
SCPI Compliance:
no
confirmed
command/query