Agilent Technologies 35670A Manual page 284

DISPlay
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:AUTO
Scales the measurement data to fit the trace box.$Iscaling;automatic
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
To scale the measurement data, send DISP:TRAC:X:AUTO ONCE.
OFF has no effect on the analyzer. ON is not a valid option, because the analyzer does not support
continuous scaling of the data along the X-axis.
The trace specifier, WINDow [1|2|3|4], determines which trace you are selecting. Omit the specifier or
send WIND1 for trace A, WIND2 for B, WIND3 for C, or WIND4 for D.
8-30
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:AUTO OFF|0|ONCE
OUTPUT 711;"DISP:TRAC:X:AUTO ONCE"
OUTPUT 711;"disp:window3:trac:x:scale:auto once"
DISPlay[:WINDow[1|2|3|4]]:TRACe:X[:SCALe]:AUTO?
Integer
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
command/query