Agilent Technologies 35670A Manual page 592

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

SYSTem:COMMunicate:SERial[:RECeive]:PARity:CHECk

Enables RS-232-C parity verification capability.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command turns on parity verification for the RS-232-C interface. To set the type of parity, send the

SYSTem:COMMunicate:SERial:PARity command.

SYSTem:COMMunicate:SERial[:RECeive]:PARity:CHECk

OUTPUT 711;"system:communicate:serial:parity:check ON"

OUTPUT 711;"SYST:COMM:SER:REC:PAR:CHEC

SYSTem:COMMunicate:SERial[:RECeive]:PARity:CHECk?

not applicable

Synchronization Required:

Preset State:

not affected by Preset

SCPI Compliance:

command/query