Agilent Technologies 35670A Manual page 166

CALCulate
CALCulate[1|2|3|4]:MARKer:DTABle:COPY[1|2|3|4]
Copies the data table from one trace to another trace.
Command Syntax:
Example Statements:
Attribute Summary:
Description:
Use the trace specifier, COPY[1|2|3|4], to indicate the source, which trace the data table is to be copied
from. Use the trace specifier, CALCulate [1|2|3|4], to indicate the destination, which trace the data table
is to be copied to.
1 specifies the data table appearing in trace box A, 2 specifies B, 3 specifies C, and 4 specifies trace box
D. If a trace specifier is not used, the trace defaults to trace A.
Note
The analzyer does not verify the traces are compatible.
6-58
CALCulate[1|2|3|4]:MARKer:DTABle:COPY[1|2|3|4]
OUTPUT 711;":calc4:marker:dtab:copy1"
OUTPUT 711;"CALC:MARK:DTABLE:COPY3"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
command