Calculate[1|2|3|4]:Unit:dbreferencecommand/Query - Agilent Technologies 35670A Manual

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:CFIT:WEIGht:REGister

Selects the data register which contains the weighting function for the curve fit operation.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

The default register is D7.

If you select the auto weight feature (the default is CALC:CFIT:WEIG:AUTO ON), the analyzer

automatically generates a weighting function and stores it in the register specified with this command.

If you disable the auto weight feature by sending the CALC:CFIT:WEIG:AUTO OFF command, the

curve fit operation uses the weighting function stored in the register specified with this command. The

analyzer does not generate and store a new weighting function.

The curve fit operation will abort if the curve fit weight register is empty or contains invalid data.

This command is not trace specific. It ignores the trace specifier.

CALCulate[1|2|3|4]:CFIT:WEIGht:REGister

D1|D2|D3|D4|D5|D6|D7|D8

OUTPUT 711;":CALC:CFIT:WEIG:REGISTER D7"

OUTPUT 711;"calc:cfit:weight:reg D1"

CALCulate[1|2|3|4]:CFIT:WEIGht:REGister?

D1|D2|D3|D4|D5|D6|D7|D8

1D3 Curve Fit/Synthesis

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query