Agilent Technologies 35670A Manual page 443

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]AVERage:IMPulse

Enables impulse detection in octave measurements.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

When impulse detection is on (AVER:IMP ON), the analyzer computes and displays the IEC 651 impulse

characteristics in the overall power band.

In linear averaging (AVER:TYPE RMS;TCON FRE), the analyzer calculates the value of the impulse

output over the average time (specified with the AVER:TIME command).

In all other types of averaging, the analyzer calculates the instantaneous value of the impulse vector.

See the analyzer's Online Help for additional information.

[SENSe:]AVERage:IMPulse OFF|0|ON|1

OUTPUT 711;":AVER:IMPULSE ON"

OUTPUT 711;"sens:aver:impulse ON"

[SENSe:]AVERage:IMPulse?

1D1 Realtime Octave

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query