Calculate[1|2|3|4]:Marker:dtable:x:deletecommand - Agilent Technologies 35670A Manual

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

Clears the Status Byte by emptying the error queue and clearing all event registers.

Command Syntax:

Example Statements:

Attribute Summary:

Description:

This command clears the Status Byte register. It does so by emptying the error queue and clearing

(setting to 0) all bits in the event registers of the following register sets:

Device State

Questionable Voltage

Questionable Status

Standard Event

Operation Status

In addition, *CLS cancels any preceding *OPC command or query. This ensures that bit 0 of the

Standard Event register will not be set to 1 and that a response will not be placed in the analyzer's output

queue when pending overlapped commands are completed.

*CLS does not change the current state of enable registers or transition filters.

To guarantee that the Status Byte's Message Available and Master Summary Status bits

are cleared, send *CLS immediately following a Program Message Terminator.

See chapter 1 for more information on the Status Byte register.

OUTPUT 711;"*Cls"

OUTPUT 711;"*CLS"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

Common Commands